1490
C
93: IP
6 PIM C
HAPTER
V
Parameter
Description
Example
pim ipv6 sm
Syntax
View
Parameter
Description
Related command:
Example
pim ipv6 state-refresh-capable
Syntax
View
Parameter
C
ONFIGURATION
OMMANDS
None
Use the
pim ipv6 require-genid
without Generation_ID.
Use the
undo pim ipv6 require-genid
configuration.
By default, hello messages without Generation_ID are accepted.
# Enable Ethernet 1/0 to reject hello messages without Generation_ID.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim ipv6 require-genid
pim ipv6 sm
undo pim ipv6 sm
Interface view
None
Use the
pim ipv6 sm
Use the
undo pim ipv6 sm
By default, IPv6 PIM-SM is disabled.
pim ipv6 dm.
# Enable IPv6 PIM-SM on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim ipv6 sm
pim ipv6 state-refresh-capable
undo pim ipv6 state-refresh-capable
Interface view
None
command enable rejection of hello messages
command to restore the default
command to enable IPv6 PIM-SM.
command to disable IPv6 PIM-SM.