Display Ospf Sham-Link - H3C MSR 20-20 Command Reference Manual

1690 C 98: MPLS L3VPN C
HAPTER

display ospf sham-link

Syntax
View
Parameter
Description
Related command:
Example
C
ONFIGURATION OMMANDS
Import VPN Targets :
Import Route Policy : poly-1
Description : This is vpn1
Maximum number of Routes : 500
Interfaces : Ethernet1/0
Table 458 Description on the fields of display ip vpn-instance instance-name
Field
VPN-Instance Name and ID
CreateTime
Up time
Route Distinguisher
Export VPN Targets
Import VPN Targets
Import Route Policy
Description
Maximum number of Routes
Interfaces
display ospf [ process-id ] sham-link [ area area-id ]
Any view
process-id: OSPF process ID, in the range 1 to 65535.
area-id: OSPF area ID. It can be an integer in the range 0 to 4294967295 or in the
format of an IPv4 address.
Use the display ospf sham-link
links.
With neither process ID nor area ID specified, the command displays information
about all configured sham links.
sham-link.
# Display information about all OSPF sham links.
<Sysname> display ospf sham-link
OSPF Process 100 with Router ID 100.1.1.2
Sham Link:
Area RouterId
0.0.0.1 100.1.1.2
Table 459 Description on the fields of the display ospf sham-link command
Field
Area
4:4 5:5
Description
Name and ID of the VPN instance
Time when the VPN instance was created
Duration of the VPN instance
RD of the VPN instance
Export target attribute of the VPN instance
Import target attribute of the VPN instance
Import routing policy of the VPN instance
Description of the VPN instance
Maximum number of routes of the VPN instance
Interface to which the VPN instance is bound
command to display information about sham
Source-IP Destination-IP
3.3.3.3 5.5.5.5
Description
OSPF area to which the sham link belongs
State Cost
P-2-P 10