display l2tp tunnel
Syntax
View
Parameter
Description
Example
interface virtual-template
Syntax
View
Parameter
Description
display l2tp tunnel
Any view
None
Use the
display l2tp tunnel
tunnels.
# Display information about L2TP tunnels.
<Sysname> display l2tp tunnel
Total tunnel = 1
LocalTID RemoteTID RemoteAddress Port
2
2284
Table 471 Description on the fields of the display l2tp tunnel command
Field
Total tunnel
LocalTID
RemoteTID
RemoteAddress
Port
Sessions
RemoteName
interface virtual-template virtual-template-number
undo interface virtual-template virtual-template-number
System view
virtual-template-number: Serial number for identifying the virtual interface
template, in the range of 0 to 1023.
Use the
interface virtual-template
template and enter its view.
Use the
undo interface virtual-template
interface template.
By default, no virtual interface template exists.
command to display information about L2TP
11.1.1.1
1701
Description
Number of active tunnels
Unique ID of the tunnel at the local end
Unique ID of the tunnel at the remote end
IP address of the peer
Port number of the peer
Number of sessions within the tunnel
Name of the tunnel at the peer
command to create a virtual interface
command to remove a virtual
Sessions
RemoteName
1
lns
1759