Qos Apply Policy (Interface View) - H3C MSR 20-20 Command Reference Manual

1804 C 110: D
HAPTER EFINING

qos apply policy (interface view)

Syntax
View
P C
OLICY OMMANDS
Committed Access Rate:
CIR 200 (kbps), CBS 15000 (byte), EBS 0 (byte)
Conform Action: pass
Exceed Action: discard
Conformed: 0/0 (Packets/Bytes)
Exceeded : 0/0 (Packets/Bytes)
Expedited Forwarding:
Bandwidth 50 (Kbps), CBS 1500 (Bytes)
Matched
Enqueued : 0/0 (Packets/Bytes)
Discarded: 0/0 (Packets/Bytes)
Classifier: database
Matched : 0/0 (Packets/Bytes)
Operator: AND
Rule(s) : if-match acl 3131
if-match inbound interface Ethernet1/0
Behavior: database
General Traffic Shape:
CIR 300 (kbps), CBS 15000 (byte), EBS 0 (byte)
Queue Length: 50 (Packets)
Queue size
Passed
Discarded:
Delayed
Marking:
Remark MPLS EXP 3
Remarked: 0 (Packets)
Assured Forwarding:
Bandwidth 30 (Kbps)
Matched
Enqueued : 0/0 (Packets/Bytes)
Discarded: 0/0 (Packets/Bytes)
Table 481 Description on the fields of the display qos policy interface command
Field Description
Interface Interface name, consisting of interface type and interface number
Direction Specifies the direction that the policy is applied to the interface.
Policy Name of the policy applied to the interface
Classifier Classification rules and corresponding configurations in the policy
Matched Number of packets matching classification rules
Operator Logical relationship of the classification rules in the same class
Rule(s) Classification rules of class
Behavior Name and configuration information of the behavior. Refer to "traffic
behavior" on page 1799.
qos apply policy policy-name { inbound | outbound [ dynamic ] }
undo qos apply policy { inbound | outbound }
Interface view
: 0/0 (Packets/Bytes)
: 0 (Packets)
: 0/0 (Packets/Bytes)
0/0 (Packets/Bytes)
: 0/0 (Packets/Bytes)
: 0/0 (Packets/Bytes)