H3C MSR 20-20 Command Reference Manual page 1588

1588 C 96: MPLS TE C
HAPTER
Description
Example
C
ONFIGURATION OMMANDS
ip-address: IP address of an interface.
network-lsa: Displays traffic engineering database (TEDB) information in network
LSAs.
node: Displays the TEDB information on nodes. If no node is specified, the TEDB
information on all nodes is displayed.
mpls-lsr-id: Specifies a node by its MPLS LSR ID.
|: Filters output by regular expression.
begin: Displays information beginning with a defined regular expression.
include: Displays information that includes a defined regular expression.
exclude: Displays information that excludes a defined regular expression.
regular-expression: Regular expression, a string of 1 to 80 characters without
spaces.
Use the
display mpls te cspf tedb
CSPF-based TEDB by specified criteria.
# Display TEDB information in network LSAs.
<Sysname> display mpls te cspf tedb network-lsa
Maximum Network LSA Supported:
Current Total Network LSA Number:
Id DR MPLS LSR-Id DR-Address
1 8.1.1.2
2 2.1.1.1
3 3.1.1.2
4 4.1.1.2
5 5.1.1.2
6 6.1.1.2
7 7.1.1.1
Table 406 Description on the fields of the display mpls te cspf tedb command
Field
ID
DR MPLS LSR-Id
DR-Address
IGP
command to display information about
500
7
IGP
3.0.0.2 OSPF
3.0.0.3 OSPF
3.0.0.4 OSPF
3.0.0.5 OSPF
3.0.0.6 OSPF
3.0.0.9 OSPF
12.0.0.7 OSPF
Description
Number
MPLS LSR ID of the designated router (DR)
Interface address of the DR
Interior gateway protocol: OSPF or IS-IS
Process-Id Area Neighbor
100 0 1.1.1.1
2.1.1.1
8.1.1.2
100 0 2.1.1.1
3.1.1.1
2.1.1.2
100 0 3.1.1.1
4.1.1.1
3.1.1.2
100 0 4.1.1.1
5.1.1.1
4.1.1.2
100 0 5.1.1.1
6.1.1.1
5.1.1.2
100 0 6.1.1.1
7.1.1.1
6.1.1.2
100 0 3.1.1.1
7.1.1.1
7.1.1.2