Command Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510
6.1.10 pim
Syntax
pim
undo pim
View
System view
Parameter
None
Description
Use the pim command to enter PIM view and configure the global PIM parameters. You
cannot use the pim command to enable the PIM protocol.
Use the undo pim command to exit to system view and clear the global PIM parameter
configurations.
Example
# Enter PIM view.
<H3C>system-view
System View: return to User View with Ctrl+Z.
[H3C] multicast routing-enable
[H3C] pim
[H3C-pim]
6.1.11 pim bsr-boundary
Syntax
pim bsr-boundary
undo pim bsr-boundary
View
VLAN interface view
Parameter
None
Description
Use the pim bsr-boundary command to configure a VLAN interface of the switch as
the PIM domain boundary.
Chapter 6 PIM Configuration Commands
6-11