qos priority
Syntax
View
Parameters
Description
Examples
119
P
P
ORT
RIORITY
C
OMMANDS
qos priority priority-value
undo qos priority
Ethernet interface view/port group view
priority-value: Port priority value, in the range 0 to 7. The default value is 0.
Use the
command to configure the port priority of current port.
qos priority
Use the
undo qos priority
Port group is supported if the number of the interfaces on a layer 2 module is 16,
24 or 48.
Execute the command in interface view, and the setting is effective on the current
interface only. Execute the command in interface group view, and the setting is
effective on all interfaces in the interface group.
# Configure the Ethernet 1/0 priority to 2.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] qos priority 2
C
ONFIGURATION
command to restore to the default value.
1843