Display Mpls Rsvp-Te Established - H3C MSR 20-20 Command Reference Manual

display mpls rsvp-te established

Syntax
View
Parameter
Description
Example
display mpls rsvp-te established [ interface interface-type interface-number ] [ |
{ begin | include | exclude } regular-expression ]
Any view
interface interface-type interface-number: Specifies an interface by its type and
number.
|: Filters output by regular expression.
begin: Displays information beginning with a defined regular expression.
include: Displays information that includes a defined regular expression.
exclude: Displays information that excludes a defined regular expression.
regular-expression: Regular expression, a string of 1 to 80 characters without
spaces.
Use the
display mpls rsvp-te established
about RSVP-TE globally or for an interface.
# Display RSVP-TE information for interface Ethernet 1/0.
<Sysname> display mpls rsvp-te established interface ethernet 1/0
Interface Ethernet1/0
Token Bucket Rate: 0.00
Tunnel Dest: 2.2.2.2
Local LSP ID: 4
Next Hop Addr: 80.4.1.1
Upstream Label: 1024
Table 396 Description on the fields of the display mpls rsvp-te established command
Field
Interface Ethernet1/0
Token Bucket rate
Peak Data Rate
Tunnel Dest
Ingress LSR ID
Local LSP ID
Session Tunnel ID
Next Hop Addr
Upstream label
Downstream Label
command to display information
Peak Data Rate: 0.00
Ingress LSR ID: 3.3.3.3
Session Tunnel ID: 4
Downstream Label: 3
Description
RSVP-TE enabled Ethernet interface
Token bucket rate, a traffic parameter
Peak rate, a traffic parameter
Tunnel destination, in the format of X.X.X.X
Ingress LSR ID, in the format of X.X.X.X
Local LSP ID
Session tunnel ID
Next hop address, in the format of X.X.X.X
Upstream label
Downstream label
1575