Display Qos Trust Interface; Qos Trust - H3C MSR 20-20 Command Reference Manual

display qos trust interface

Syntax
View
Parameters
Description
Examples

qos trust

Syntax
View
Parameters
120
P P
ORT RIORITY
C
ONFIGURATION
display qos trust interface [ interface-type interface-number ]
Any view
interface-type interface-number: Specifies an interface by its type and number.
Use the
display qos trust interface
the port priority trust mode currently configured.
If no interface is specified, the port priority trust mode of all interfaces will be
displayed.
# Display the information about the port priority trust mode currently configured.
<Sysname> display qos trust interface ethernet 1/0
Interface: Ethernet1/0
Port priority information
Port priority :4
Table 489 Description on the fields of the display qos trust interface command
Field Description
Interface Interface name, consisting of interface type and interface number
Port priority Port priority
qos trust dot1p
undo qos trust
L2 module Ethernet interface view/port group view
dot1p: Specifies to trust 802.1p priority carried with a packet, and perform
priority mapping using this priority.
T M
RUST ODE
C
OMMANDS
command to display the information about
1845