User; Vam Client Enable - H3C MSR 20-20 Command Reference Manual

1736 C 100: VAM C
HAPTER
Related command:
Example

user

Syntax
View
Parameter
Description
Related command:
Example

vam client enable

Syntax
C C
LIENT ONFIGURATION OMMANDS
By default, no public IP address or UDP port number is specified for the secondary
VAM server.
vam client name, and server primary ip-address.
# Specify public IP address 1.1.1.2 and port number 50000 for the secondary VAM
server.
<Sysname> system-view
[Sysname] vam client name abc
[Sysname-vam-client-name-abc] server secondary ip-address 1.1.1.2 port 50000
user username password { cipher | simple } string
undo user
VAM client view
Username: Username of a VAM client, a string of 1 to 55 characters, excluding
special characters /, :, *, ?, <, >, @, |, , and ".
cipher: Displays a password in the cipher text mode.
simple: Displays a password in the plain text mode.
String: Password of a VAM client, a case sensitive string of 1 to 63 characters.
Use the use r command to configure a local username and password.
Use the
undo user
By default, no local username or password is configured.
Note that only one local username can be configured in VAM client view.
vam client name.
# Set the local username and password both to user.
<Sysname> system-view
[Sysname] vam client name abc
[Sysname-vam-client-name-abc] user user password simple user
vam client enable { all | name client-name }
undo vam client enable { all | name client-name }
command to remove the configuration.