1402
C
90: PIM C
HAPTER
ONFIGURATION
Description
Related command:
Example
C
OMMANDS
match: Displays routing entries of which the OIL includes only the specified
interface.
mode mode-type: Specifies a PIM mode, where mode-type can have the
following values:
dm: Specifies PIM-DM.
■
sm: Specifies PIM-SM.
■
ssm: Specifies PIM-SSM.
■
flags flag-value: Displays routing entries containing the specified flag(s). The
values of flag-value and their meanings are as follows:
2msdp: Specifies routing entries to be contained in the next SA message to
■
notify an MSDP peer.
act: Specifies multicast routing entries to which actual data has arrived.
■
del: Specifies multicast routing entries scheduled to be deleted.
■
exprune: Specifies multicast routing entries containing outgoing interfaces
■
pruned by other multicast routing protocols.
ext: Specifies routing entries containing outgoing interfaces contributed by
■
other multicast routing protocols.
loc: Specifies multicast routing entries on routers directly connecting to the
■
same subnet with the multicast source.
msdp: Specifies routing entries learned from MSDP SA messages.
■
niif: Specifies multicast routing entries containing unknown incoming
■
interfaces
nonbr: Specifies routing entries with PIM neighbor searching failure.
■
rpt: Specifies routing entries on RPT branches where (S, G) prunes have been
■
sent to the RP.
rq: Specifies multicast routing entries of the receiving side of the switch-MDT.
■
spt: Specifies routing entries on the SPT.
■
sq: Specifies multicast routing entries of the originator side of switch-MDT
■
switchover.
swt: Specifies routing entries in the process of RPT-to-SPT switchover.
■
wc: Specifies wildcard routing entries.
■
fsm: Displays the detailed information of the finite state machine (FSM).
Use the
display pim routing-table
information.
display multicast routing-table on page 1331.
# View the content of the PIM routing table in the public instance.
<Sysname> display pim routing-table
Vpn-instance: public net
command to view PIM routing table