1636
C
96: MPLS TE C
HAPTER
Related command:
Example
mpls te tunnel-id
Syntax
View
Parameters
Description
Examples
mpls te vpn-binding
Syntax
View
Parameter
Description
C
ONFIGURATION
OMMANDS
mpls te retry.
# Set the interval for re-establishing tunnel 0 to 20 seconds.
<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] mpls te timer retry 20
mpls te tunnel-id tunnel-id
Tunnel interface view
tunnel-id: Tunnel ID. The value range and default vary by device.
Use the
mpls te tunnel-id
You need to configure the tunnel ID before issuing the mpls te commit command
for the first time. Otherwise, the tunnel cannot be created.
n
Once configured, a tunnel ID cannot be removed. To change a tunnel ID, you need
to remove the tunnel and then reconfigure the tunnel, giving it a new tunnel ID.
# Configure the tunnel ID as 100.
<Sysname> system-view
[Sysname] interface tunnel 1/0/0
[Sysname-Tunnel1/0/0] mpls te tunnel-id 100
mpls te vpn-binding { acl acl-number | vpn-instance vpn-instance-name }
undo mpls te vpn-binding
Tunnel interface view
acl-number: Referenced ACL number, in the range 3000 to 3999. The MPLS TE
tunnel forwards only VPN instance traffic that matches the referenced ACL.
vpn-instance-name: VPN instance name, a string of 1 to 31 characters. The MPLS
TE tunnel forwards only traffic of the specified VPN instance.
Use the
mpls te vpn-binding
MPLS TE tunnel.
Use the
undo mpls te vpn-binding
By default, no restriction is defined about what traffic can travel down a TE tunnel.
command to configure the tunnel ID.
command to define the traffic that can travel the
command to restore the default.