Peer Request-Sa-Enable; Peer Sa-Cache-Maximum - H3C MSR 20-20 Command Reference Manual

1376 C 89: MSDP C
HAPTER

peer request-sa-enable

Syntax
View
Parameter
Description
Related command:
Example

peer sa-cache-maximum

Syntax
View
Parameter
C
ONFIGURATION OMMANDS
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 110.10.10.1 minimum-ttl 10
peer peer-address request-sa-enable
undo peer peer-address request-sa-enable
Public instance MSDP view, VPN instance MSDP view
peer-address: MSDP peer address.
Use the
peer request-sa-enable
request messages.
Use the undo peer request-sa-enable
sending SA request messages.
By default, no SA request message is sent.
Note that before you can enable the device to send SA requests, you must disable
the SA message cache mechanism.
cache-sa-enable.
# Disable the SA message cache mechanism in the public instance, and enable the
router to send an SA request message to the MSDP peer 125.10.7.6 upon
receiving a new Join message..
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] undo cache-sa-enable
[Sysname-msdp] peer 125.10.7.6 request-sa-enable
peer peer-address sa-cache-maximum sa-limit
undo peer peer-address sa-cache-maximum
Public instance MSDP view, VPN instance MSDP view
peer-address: MSDP peer address.
sa-limit: Maximum number of SA messages that the device can cache, in the range
of 1 to 8,192.
command to enable the device to send SA
command to disable the device from