Holdtime Join-Prune (Ipv6 Pim View) - H3C MSR 20-20 Command Reference Manual

1482 C 93: IP 6 PIM C
HAPTER V
View
Parameter
Description
Related command:
Example

holdtime join-prune (IPv6 PIM view)

Syntax
View
Parameter
Description
Related command:
Example
C
ONFIGURATION OMMANDS
IPv6 PIM view
interval: Assert timeout time in seconds, with an effective range of 7 to
2,147,483,647.
Use the
holdtime assert
timeout time.
Use the
undo holdtime assert
By default, the assert timeout time is 180 seconds.
holdtime join-prune (IPv6 PIM view), pim ipv6 holdtime join-prune and pim
ipv6 holdtime assert.
# Set the global value of the assert timeout time to 100 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] holdtime assert 100
holdtime join-prune interval
undo holdtime join-prune
IPv6 PIM view
interval: Join/prune timeout time in seconds, with an effective range of 1 to
65,535.
Use the
holdtime join-prune
join/prune timeout time.
Use the undo holdtime join-prune
By default, the join/prune timeout time is 210 seconds.
holdtime assert (IPv6 PIM view), pim ipv6 holdtime assert and pim ipv6
holdtime join-prune.
# Set the global value of the join/prune timeout time to 280 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] holdtime join-prune 280
command to configure the global value of the assert
command to restore the default setting.
command to configure the global value of the
command to restore the default setting.