View
Parameter
Description
Related command:
Example
reset mpls fast-forwarding cache
Syntax
View
Parameter
Description
Example
reset mpls ldp
Syntax
View
Parameter
MPLS LDP remote peer view
ip-address: IP address of the remote peer.
Use the
command to configure the LDP remote peer IP address.
remote-ip
Use the
undo remote-ip
Note that the LDP remote peer IP address must be the MPLS LSR ID of the remote
peer. Two peers use their respective MPLS LSR ID as the transport addresses to
establish the TCP connection.
mpls ldp remote-peer.
# Configure the LDP remote peer IP address.
<Sysname> system-view
[Sysname] mpls ldp remote-peer BJI
[Sysname-mpls-ldp-remote-bji] remote-ip 3.3.3.3
reset mpls fast-forwarding cache
User view
None
Use the
reset mpls fast-forwarding cache
the MPLS fast forwarding cache.
# Clear information in the MPLS fast forwarding cache.
<Sysname> reset mpls fast-forwarding cache
reset mpls ldp [ all | [ vpn-instance vpn-instance-name ] [ fec mask | peer peer-id ] ]
User view
all: Specifies all LDP instances, including the public ones and private ones.
vpn-instance vpn-instance-name: Specifies a VPN instance by its name, a
case-sensitive string of 1 to 31 characters.
fec mask: Specifies a FEC by the destination IP address and mask.
peer peer-id: Specifies a peer by its LSR ID.
command to remove the configuration.
command to clear information in
1557