Pim Ipv6 Hello-Option Dr-Priority; Pim Ipv6 Hello-Option Holdtime - H3C MSR 20-20 Command Reference Manual

1486 C 93: IP 6 PIM C
HAPTER V

pim ipv6 hello-option dr-priority

Syntax
View
Parameter
Description
Related command:
Example

pim ipv6 hello-option holdtime

Syntax
View
Parameter
Description
Related command:
C
ONFIGURATION OMMANDS
pim ipv6 hello-option dr-priority priority
undo pim ipv6 hello-option dr-priority
Interface view
priority: Router priority for DR election, in the range of 0 to 4294967295. A larger
value of this argument means a higher priority.
Use the
pim ipv6 hello-option dr-priority
priority for DR election on the current interface.
Use the
undo pim ipv6 hello-option dr-priority
default setting.
By default, the router priority for DR election is 1.
hello-option dr-priority (IPv6 PIM view).
# Set the router priority for DR election to 3 on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim ipv6 hello-option dr-priority 3
pim ipv6 hello-option holdtime interval
undo pim ipv6 hello-option holdtime
Interface view
interval: IPv6 PIM neighbor timeout time in seconds, with an effective range of 1
to 65,535.
Use the
pim ipv6 hello-option holdtime
neighbor timeout time on the current interface.
Use the
undo pim ipv6 hello-option holdtime
default setting.
By default, the IPv6 PIM neighbor timeout time is 105 seconds.
hello-option holdtime (IPv6 PIM view).
command to configure the router
command to restore the
command to configure the PIM
command to restore the