H3C MSR 20-20 Command Reference Manual page 1651

Table 423 Description on the fields of the display bgp l2vpn peer verbose command
Field
Address family L2VPN
Received
Sent
Maximum allowed prefix number
Threshold
Routing policy configured
# Display L2VPN information with the RD being 100:1 in the BGP routing table.
<Sysname> display bgp l2vpn route-distinguisher 100:1
BGP Local router ID : 2.2.2.9, local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
bgp.l2vpn: 1 destination
CE ID Label Offset
4 0
Table 424 Description on the fields of display bgp l2vpn route-distinguisher
Field
BGP Local router ID
local AS number
Origin codes
bgp l2vpn
Route Distinguisher
CE ID
Label Offset
Label Base
nexthop
pref
as-path
# Display L2VPN information with the RD being 100:1 and the CE ID being 4 in the
BGP routing table.
<Sysname> display bgp l2vpn route-distinguisher 100:1 ce-id 4
BGP Local router ID : 2.2.2.9, local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
CE ID Label Offset
1 0
Description
L2VPN address family
Total number of received messages and that of
received update messages
Total number of sent messages and that of received
update messages
Maximum number of routes allowed
Threshold value
Routing policy specified for the peer
Label Base
132096
Description
BGP local router ID
Local AS number
Route origin codes, which can be:
i - IGP: Indicates that the network layer reachability information is
from within the AS
e - EGP: Indicates that the network layer reachability information is
learned through EGP
? - incomplete: Indicates that the network layer reachability
information is learned through other ways
Number of BGP L2VPNs
RD
CE number in the VPN
Label offset
Label base
IP address of the next hop
Preference
AS-PATH of the route
Label Base nexthop
8202 3.3.3.9
nexthop pref
3.3.3.9 100
pref as-path
100
1651
as-path