Display Ipv6 Config Policy-Based-Route; Display Ipv6 Policy-Based-Route - H3C MSR 20-20 Command Reference Manual

Example

display ipv6 config policy-based-route

Syntax
View
Parameter
Description
Example

display ipv6 policy-based-route

Syntax
View
Parameter
Description
Example
# Specify the interface Serial 2/0 as the outgoing interface for matched IPv6
packets.
<Sysname> system-view
[Sysname] ipv6 policy-based-route aa permit node 11
[Sysname-pbr6-aa-11] apply output-interface serial 2/0
display ipv6 config policy-based-route policy-name
Any view
policy-name: Policy name, a string of 1 to 19 characters.
Use the display ipv6 config policy-based-route
configured IPv6 policy routing information.
# Display the configured IPv6 policy routing information.
<Sysname> display ipv6 config policy-based-route
IPv6 Policy based routing configuration information:
ipv6 policy-based-route : abc
Node 1 permit :
apply output-interface Ethernet1/0
Table 192 Description on the fields of the display ipv6 config policy-based-route
command
Field
IPv6 Policy based routing configuration
information
ipv6 policy-based-route: abc
Node 1 permit :
apply output-interface Ethernet1/0
display ipv6 policy-based-route
Any view
None
Use the
display ipv6 policy-based-route
interface IPv6 policy routing information.
# Display system and interface IPv6 policy routing information.
command to display the
Description
IPv6 policy routing configuration
information
Policy name
The match mode of Node 1 is permit.
The outgoing interface for matched packet
is Ethernet1/0.
command to display system and
893