Vpn-Instance-Capability Simple; Vpn-Target (Vpn Instance View) - H3C MSR 20-20 Command Reference Manual

Example

vpn-instance-capability simple

Syntax
View
Parameter
Description
Example

vpn-target (VPN instance view)

Syntax
View
Parameter
# Define a tunneling policy, specifying that only GRE tunnels can be used and the
number of tunnels for load balancing be 2.
<Sysname> system-view
[Sysname] tunnel-policy po1
[Sysname-tunnel-policy-po1] tunnel select-seq gre load-balance-number 2
vpn-instance-capability simple
undo vpn-instance-capability
OSPF multi-instance view
None
Use the
vpn-instance-capability simple
multi-VPN-instance CE.
Use the undo vpn-instance-capability
By default, the function is disabled.
# Enable multi-VPN-instance CE.
<Sysname> system-view
[Sysname] ospf 100 vpn-instance vpna
[Sysname-ospf-100] vpn-instance-capability simple
vpn-target vpn-target&<1-8> [ both | export-extcommunity |
import-extcommunity ]
undo vpn-target { all | { vpn-target&<1-8> [ both | export-extcommunity |
import-extcommunity ] }
VPN instance view
vpn-target&<1-8>: Adds the VPN target extended community attribute to the
import or export VPN target extended community list and specify the VPN target in
the format nn:nn or IP-address:nn. &<1-8> means that you can specify this
argument for up to 8 times.
A VPN target attribute can be of 3 to 21 characters and in either of these two
formats:
16-bit AS number: 32-bit user-defined number. For example, 101:3.
■
32-bit IP address: 16-bit user-defined number. For example, 192.168.122.15:1.
■
command to enable
command to disable the function.
1719