Ip Rpf-Route-Static - H3C MSR 20-20 Command Reference Manual

1334 C 87: M
HAPTER ULTICAST
Example

ip rpf-route-static

Syntax
View
Parameter
R F C
OUTING AND ORWARDING
# View all the RPF information of multicast source 192.168.1.55 in the public
network.
<Sysname> display multicast rpf-info 192.168.1.55
RPF information about source 192.168.1.55:
RPF interface: Ethernet1/0, RPF neighbor: 10.1.1.1
Referenced route/mask: 192.168.1.0/24
Referenced route type: igp
Route selection rule: preference-preferred
Load splitting rule: disable
Table 326 Description on the fields of the display multicast rpf-info command
Field
RPF information about source
192.168.1.55
RPF interface
RPF neighbor
Referenced route/mask
Referenced route type
Route selection rule
Load splitting rule
ip rpf-route-static [ vpn-instance vpn-instance-name ] source-address { mask |
mask-length } [ protocol [ process-id ] ] [ route-policy policy-name ] { rpf-nbr-address
| interface-type interface-number } [ preference preference ] [ order order-number ]
undo ip rpf-route-static [ vpn-instance vpn-instance-name ] source-address { mask |
mask-length } [ protocol [ process-id ] ] [ route-policy policy-name ]
System view
vpn-instance-name: VPN instance name, a case sensitive string of up to 31
characters.
source-address: Multicast source address.
mask: Mask of the multicast source address.
mask-length: Mask length of the multicast source address, in the range of 0 to 32.
C
ONFIGURATION OMMANDS
Description
Information of the RPF path to multicast source
192.168.1.55
RPF interface
IP address of the RPF neighbor
Referenced route and its mask length
Type of the referenced route, which can be any of the
following:
igp: unicast route (IGP)
■
egp: unicast route (BGP)
■
unicast (direct): unicast route (directly connected)
■
unicast: other unicast route (such as unicast static
■
route)
multicast static: multicast static route
■
Rule for RPF route selection, which can be based on the
preference of the routing protocol or based on the
longest match on the destination address
Status of the load splitting rule (enabled/disabled)