Delete Hop; Display Explicit-Path - H3C MSR 20-20 Command Reference Manual

1566 C 96: MPLS TE C
HAPTER

delete hop

Syntax
View
Parameter
Description
Example

display explicit-path

Syntax
View
Parameter
Description
Example
C
ONFIGURATION OMMANDS
<Sysname> system-view
[Sysname] explicit-path path1
[Sysname-explicit-path-path1] add hop 3.3.29.3 exclude after 3.3.10.5
delete hop ip-address
Explicit path view
ip-address: IP address of a node along the explicit path.
Use the delete hop
# Remove the node identified by 10.0.0.1 from the explicit path PL.
<Sysname> system-view
[Sysname] explicit-path path1
[Sysname-explicit-path-path1] delete hop 10.0.0.1
display explicit-path [ pathname ]
Any view
pathname: Specifies a path name, a string of 1 to 31 characters.
Use the display explicit-path
path.
If no path name is specified, information about all explicit paths is displayed.
# Display information about all explicit paths.
<Sysname> display explicit-path
Path Name : ErHop-Path1
1 1.1.1.10
2 2.1.1.10
3 1.1.1.20
4 2.1.1.20
5 2.1.1.30
6 1.1.1.30
7 9.4.4.4
Path Name : ErHop-Path2
1 1.1.1.10
2 2.1.1.10
3 1.1.1.40
4 2.1.1.40
5 1.1.1.50
6 2.1.1.40
command to remove a specified node from the explicit path.
command to display information about an explicit
Path Status : Enabled
Strict
Strict
Strict
Strict
Strict
Strict
Strict
Path Status : Enabled
Strict
Strict
Strict
Strict
Strict
Strict
Include
Include
Include
Include
Include
Include
Include
Include
Include
Include
Include
Include
Include