Pim Hello-Option Neighbor-Tracking; Pim Hello-Option Override-Interval - H3C MSR 20-20 Command Reference Manual

1414 C 90: PIM C
HAPTER

pim hello-option neighbor-tracking

Syntax
View
Parameter
Description
Related command:
Example

pim hello-option override-interval

Syntax
View
Parameter
Description
C
ONFIGURATION OMMANDS
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim hello-option lan-delay 200
pim hello-option neighbor-tracking
undo pim hello-option neighbor-tracking
Interface view
None
Use the
pim hello-option neighbor-tracking
suppression, namely enable neighbor tracking, on the current interface.
Use the undo pim hello-option neighbor-tracking
suppression.
By default, join suppression is enabled, namely neighbor tracking is disabled.
hello-option neighbor-tracking (PIM view).
# Disable join suppression on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim hello-option neighbor-tracking
pim hello-option override-interval interval
undo pim hello-option override-interval
Interface view
interval: Prune override interval in milliseconds, with an effective range of 1 to
65,535.
Use the
pim hello-option override-interval
override interval on the current interface.
Use the
undo pim hello-option override-interval
default setting.
By default, the prune override interval is 2,500 milliseconds.
command to disable join
command to enable join
command to configure the prune
command to restore the