H3C MSR 20-20 Command Reference Manual page 1777

Msr 20/30/50 series routers
Hide thumbs Also See for MSR 20-20:
Table of Contents

Advertisement

1777
Execute the command in interface view, and the setting is effective on the current
interface only.
Related commands:
acl on page 2087.
n
IPv6 is not supported for traffic shaping for software forwarding.
Examples
# Configure traffic shaping for the packets that conform to ACL rule 2001 at the
Ethernet1/0 interface. The normal traffic is 200 kbps. The burst size, twice of the
normal traffic (50000 bytes), is allowed at the first time. Then packets are normally
transmitted when the traffic is less than or equal to 200 kbps. When the rate is
larger than 200 kbps, packets will be added to the buffer queue, which is 100
long.
<Sysname> system-view
[Sysname] interface ethernet1/0
[Sysname-Ethernet1/0] qos gts acl 2001 cir 200 cbs 50000 ebs 0 queue
-length 100

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msr 20-21Msr 30-16Msr 30-20Msr 30-40Msr 30-60Msr 50 ... Show all

Table of Contents