Display Msdp Sa-Count - H3C MSR 20-20 Command Reference Manual

1370 C 89: MSDP C
HAPTER

display msdp sa-count

Syntax
View
Parameter
Description
Related command:
Example
C
ONFIGURATION OMMANDS
display msdp [ vpn-instance vpn-instance-name | all-instance ] sa-count
[ as-number ]
Any view
vpn-instance-name: VPN instance name, a case sensitive string of up to 31
characters.
all-instance: Specifies all VPN instances.
as-number: AS number, in the range of 1 to 65535.
Use the
display msdp sa-count
in the MSDP cache.
This command gives the corresponding output only after the cache-sa-enable
command is executed.
cache-sa-enable.
# View the number of SA messages in the MSDP cache in the public instance.
<Sysname> display msdp sa-count
MSDP Source-Active Count Information of VPN-Instance: public net
Number of cached Source-Active entries, counted by Peer
Peer's Address
10.10.10.10
Number of source and group, counted by AS
AS Number of source
? 3
Total 5 Source-Active entries
Table 334 Description on the fields of the display msdp sa-count command
Field
Number of cached Source-Active entries,
counted by Peer
Peer's Address
Number of SA
AS
Number of source
Number of group
command to view the number of SA messages
Number of SA
5
Number of group
3
Description
Number of SA messages counted by peer
MSDP peer addresses
Number of SA messages from this peer
Number of the AS where the MSDP peer is located.
"?" indicates that the system was unable to obtain
the AS number.
Number of multicast sources from this AS
Number of multicast groups from this AS