igmp fast-leave
Syntax
View
Parameter
Description
Related command:
Example
igmp group-policy
Syntax
View
Parameter
Description
igmp fast-leave [ group-policy acl-number ]
undo igmp fast-leave
Interface view
acl-number: Basic ACL number, in the range of 2000 to 2999. If you do not
include this option in your command, this command will take effect for all
multicast groups.
Use the
igmp fast-leave
current interface for multicast group members.
Use the
undo igmp fast-leave
the current interface.
By default, the fast leave function is disabled, namely, the IGMP querier sends an
IGMP group-specific query upon receiving an IGMP leave message from a host,
instead of sending a Leave notification directly to the upstream.
fast-leave (IGMP view) and igmp last-member-query-interval.
# Enable fast leave for multicast group members on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] igmp fast-leave
igmp group-policy acl-number [ version-number ]
undo igmp group-policy
Interface view
acl-number: Basic or advanced ACL number, in the range of 2000 to 3999.
version-number: IGMP version, in the range of 1 to 3. If you do not specify an
IGMP version, the configured group filter will apply to IGMP reports of all versions.
Use the
igmp group-policy
the current interface to control joins to specific multicast groups.
Use the
undo igmp group-policy
group filter.
command to enable the fast leave function on the
command to disable the fast leave function on
command to configure a multicast group filter on
command to remove the configured multicast
1351