Ipv6 Address Link-Local - H3C MSR 20-20 Command Reference Manual

Description
Example

ipv6 address link-local

Syntax
View
Parameter
Description
Example
Use the
ipv6 address eui-64
global unicast address in the EUI-64 format on an interface.
Use the
undo ipv6 address eui-64
global unicast address in the EUI-64 format on an interface.
By default, no site-local or global unicast address in the EUI-64 format is
configured for an interface.
# Configure Ethernet 1/1 to create an IPv6 address in the EUI-64 format.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ipv6 address 2001::1/64 eui-64
ipv6 address ipv6-address link-local
undo ipv6 address ipv6-address link-local
Interface view
ipv6-address: IPv6 link-local address. The high-order ten bits of an IPv6 link-local
address must be 1111111010 (binary), that is to say, the first group of the IPv6
link-local address must range from FE80 to FEBF (hexadecimal).
Use the
ipv6 address link-local
address for the current interface.
Use the
undo ipv6 address link-local
address of the interface.
By default, a link-local address will automatically be generated when an IPv6
site-local address or global unicast address is configured for an interface.
# Configure a link-local address on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ipv6 address fe80::1 link-local
command to configure a site-local address or
command to delete the site-local address or
command to configure manually a link-local
command to remove the link-local
879