Display Bgp Network - H3C MSR 20-20 Command Reference Manual

display bgp network

Syntax
View
Parameters
Description
Examples
Table 215 Description on the fields of the display bgp group command
Field
Configured hold timer value
Keepalive timer value
Minimum time between advertisement
runs
Peer Preferred Value
No routing policy is configured
Members
Peer
V
AS
MsgRcvd
MsgSent
OutQ
PrefRcv
Up/Down
State
display bgp network
Any view
None
Use the
display bgp network
advertised with the network command.
# Display routing information that has been advertised.
<Sysname> display bgp network
BGP Local Router ID is 10.1.4.2.
Local AS Number is 400.
Network
100.1.2.0
100.1.1.0
Table 216 Description on the fields of the display bgp network command
Field
BGP Local Router ID
Local AS Number
Network
Description
Holdtime interval
Keepalive interval
Minimum time between advertisement runs
Preferred value of the routes from the peer
No routing policy is configured for the peer
Detailed information of the members in the peer
group
IPv4 address of the peer
BGP version running on peers
AS number of the peers
Number of messages received
Number of messages sent
Number of messages to be sent
Number of prefixes received
The lasting time of a session/the lasting time of
present state (when no session is established)
State machine of peer
command to display routing information
Mask Route-policy
255.255.255.0
255.255.255.0
Short-cut
Short-cut
Description
BGP Local Router ID
Local AS Number
Network address
965