Pim Hello-Option Holdtime; Pim Hello-Option Lan-Delay - H3C MSR 20-20 Command Reference Manual

pim hello-option holdtime

Syntax
View
Parameter
Description
Related command:
Example

pim hello-option lan-delay

Syntax
View
Parameter
Description
Related command:
Example
pim hello-option holdtime interval
undo pim hello-option holdtime
Interface view
interval: PIM neighbor timeout time in seconds, with an effective range of 1 to
65,535.
Use the
pim hello-option holdtime
timeout time on the current interface.
Use the undo pim hello-option holdtime
setting.
By default, the PIM neighbor timeout time is 105 seconds.
hello-option holdtime (PIM view).
# Set the PIM neighbor timeout time to 120 seconds on Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim hello-option holdtime 120
pim hello-option lan-delay interval
undo pim hello-option lan-delay
Interface view
interval: Prune delay in milliseconds, with an effective range of 1 to 32,767.
Use the pim hello-option lan-delay
time on the current interface.
Use the
undo pim hello-option lan-delay
setting.
By default, the prune delay to 500 milliseconds.
pim hello-option override-interval, hello-option override-interval (PIM
view), and hello-option lan-delay (PIM view).
# Set the prune delay time to 200 milliseconds on Ethernet 1/0.
command to configure the PIM neighbor
command to restore the default
command to configure the prune delay
command to restore the default
1413