2.9.4
EEPMOV Instruction
1. EEPMOV is a block-transfer instruction and transfers the byte size of data indicated by R4*,
which starts from the address indicated by ER5, to the address indicated by ER6.
ER5
ER5 + R4
2. Set R4 and ER6 so that the end address of the destination address (value of ER6 + R4) does
not exceed H'00FFFFFF (the value of ER6 must not change from H'00FFFFFF to H'01000000
during execution).
ER5
ER5 + R4
H'FFFFFFF
Invalid
Rev. 3.00 Jul. 14, 2005 Page 57 of 986
Section 2 CPU
ER6
ER6 + R4
ER6
ER6 + R4
REJ09B0098-0300