Renesas H8S Series Hardware Manual page 441

• TCSR_Y
Bit Bit Name Initial Value R/W
7 CMFB 0
6 CMFA 0
5 OVF 0
4 ICIE 0
3 OS3 0
2 OS2 0
Description
R/(W)* Compare-Match Flag B
[Setting condition]
When the values of TCNT_Y and TCORB_Y match
[Clearing condition]
Read CMFB when CMFB = 1, then write 0 in CMFB
R/(W)* Compare-Match Flag A
[Setting condition]
When the values of TCNT_Y and TCORA_Y match
[Clearing condition]
Read CMFA when CMFA = 1, then write 0 in CMFA
R/(W)* Timer Overflow Flag
[Setting condition]
When TCNT_Y overflows from H'FF to H'00
[Clearing condition]
Read OVF when OVF = 1, then write 0 in OVF
R/W Input Capture Interrupt Enable
Enables or disables the ICF interrupt request (ICIX)
when the ICF bit in TCSR_X is set to 1.
0: ICF interrupt request (ICIX) is disabled
1: ICF interrupt request (ICIX) is enabled
R/W Output Select 3, 2
R/W These bits specify how the TMOY pin output level is to
be changed by compare-match B of TCORB_Y and
TCNT_Y.
00: No change
01: 0 is output
10: 1 is output
11: Output is inverted (toggle output)
Section 13 8-Bit Timer (TMR)
Rev. 3.00 Jul. 14, 2005 Page 393 of 986
REJ09B0098-0300