Renesas H8S Series Hardware Manual page 64

Section 1 Overview
Type Symbol
I/O ports P17 to P10 104 to 110, 112
P27 to P20 96 to 103
P37 to P30 128 to 121
P47 to P40 6 to 2,
P52 to P50 14 to 16
P67 to P60 85 to 78
P77 to P70 75 to 68
P86 to P80 135 to 129
P97 to P90 17 to 24
PA7 to PA0 33 to 35,
PB7 to PB0 113 to 120
PC7 to PC0 87 to 94
PD7 to PD0 59 to 66
PE4 to
1
PE0*
PF7 to PF0 43 to 50
PG7 to PG0 51 to 58
Notes: 1. Pins PE4 to PE1 are not supported by the system development tool (emulator).
2. Following precautions are required on the power-on reset signal that is applied to the
ETRST pin.
The reset signal should be applied on power supply.
Apart the power on reset circuit from this LSI to prevent the ETRST pin of the board
tester from affecting the operation of this LSI.
Apart the power on reset circuit from this LSI to prevent the system reset of this LSI
from affecting the ETRST pin of the board tester.
Rev. 3.00 Jul. 14, 2005 Page 16 of 986
REJ09B0098-0300
Pin No. I/O
Input/
Output
Input/
Output
Input/
Output
Input/
138 to 136 Output
Input/
Output
Input/
Output
Input
Input/
Output
Input/
Output
Input/
37 to 41 Output
Input/
Output
Input/
Output
Input/
Output
28 to 32 Input
Input/
Output
Input/
Output
Name and Function
Eight input/output pins
Eight input/output pins
Eight input/output pins
Eight input/output pins
Three input/output pins
Eight input/output pins
Eight input pins
Seven input/output pins
Eight input/output pins
Eight input/output pins
Eight input/output pins
Eight input/output pins
Eight input/output pins
Five input pins
Eight input/output pins
Eight input/output pins