Renesas H8S Series Hardware Manual page 669

Bit Bit Name Initial Value Slave Host Description
2 PMEE 0
1 LSMIE 0
0 LSCIE 0
[Legend]
X: Don't care
R/W

R/W PME Output Enable
Controls PME output in combination with the PMEB
bit in HICR1. PME pin output is open-drain, and an
external pull-up resistor (Vcc) is needed.
PMEE
0
1
1

R/W LSMI output Enable
Controls LSMI output in combination with the LSMIB
bit in HICR1. LSMI pin output is open-drain, and an
external pull-up resistor (Vcc) is needed.
LSMIE
0
1
1

R/W LSCI output Enable
Controls LSCI output in combination with the LSCIB
bit in HICR1. LSCI pin output is open-drain, and an
external pull-up resistor (Vcc) is needed.
LSCIE
0
1
1
Section 18 LPC Interface (LPC)
PMEB
X : PME output disabled, other
function of pin is enabled
: PME output enabled, PME pin
0
output goes to 0 level
: PME output enabled, PME pin
1
output is high-impedance
LSMIB
X : LSMI output disabled, other
function of pin is enabled
0 : LSMI output enabled, LSMI pin
output goes to 0 level
1 : LSMI output enabled, LSMI pin
output is Hi-Z
LSCIB
X : LSCI output disabled, other
function of pin is enabled
0 : LSCI output enabled, LSCI pin
output goes to 0 level
1 : LSCI output enabled, LSCI pin
output is high-impedance
Rev. 3.00 Jul. 14, 2005 Page 621 of 986
REJ09B0098-0300