Notes On Use Of The Eepmov Instruction - Renesas F-ZTAT H8 Series Hardware Manual

8-bit single-chip microcomputer

Hide thumbs Also See for F-ZTAT H8 Series:

Table of Contents

Notes on Use of the EEPMOV Instruction

• The EEPMOV instruction is a block data transfer instruction. It moves the number of bytes

specified by R4L from the address specified by R5 to the address specified by R6.

• When setting R4L and R6, make sure that the final destination address (R6 + R4L) does not

exceed H'FFFF. The value in R6 must not change from H'FFFF to H'0000 during execution of

the instruction.

Rev.3.00 Jul. 19, 2007 page 70 of 532

REJ09B0397-0300