Section 8 I/O Ports
8.15.7
Port F Input Pull-Up MOS
Port F has a built-in input pull-up MOS that can be controlled by software. Input pull-up MOS
can be specified as on or off on an individual bit basis. Table 8.11 summarizes the input pull-up
MOS states.
Table 8.11 Port F Input Pull-Up MOS States
Reset
Off
[Legend]
Off:
Always off.
On/Off
On when PFDDR = 0 and PFODR = 1; otherwise off.
Rev. 3.00 Jul. 14, 2005 Page 232 of 986
REJ09B0098-0300
Hardware Standby
Mode
Off
Software Standby
Mode
On/Off
In Other Operations
On/Off