Keyboard Control Register H (Kbcrh) - Renesas H8S Series Hardware Manual

Section 17 Keyboard Buffer Control Unit (KBU)
17.3.3

Keyboard Control Register H (KBCRH)

KBCRH indicates the operating status of the keyboard buffer control unit.
Bit Bit Name Initial Value
7 KBIOE 0
6 KCLKI 1
5 KDI 1
4 KBFSEL 1
Rev. 3.00 Jul. 14, 2005 Page 588 of 986
REJ09B0098-0300
R/W Description
R/W Keyboard In/Out Enable
Selects whether or not the keyboard buffer control unit
is used.
0: The keyboard buffer control unit is non-operational
(KCLK and KD signal pins have port functions)
1: The keyboard buffer control unit is enabled for
transmission and reception (KCLK and KD signal
pins are in the bus drive state)
R Keyboard Clock In
Monitors the KCLK I/O pin. This bit cannot be modified.
0: KCLK I/O pin is low
1: KCLK I/O pin is high
R Keyboard Data In:
Monitors the KDI I/O pin. This bit cannot be modified.
0: KD I/O pin is low
1: KD I/O pin is high
R/W Keyboard Buffer Register Full Select
Selects whether the KBF bit is used as the keyboard
buffer register full flag or as the KCLK fall interrupt flag.
When KBF bit is used as the KCLK fall interrupt flag,
the KBE bit in KBCRL should be cleared to 0 to disable
reception.
0: KBF bit is used as KCLK fall interrupt flag
1: KBF bit is used as keyboard buffer register full flag