Renesas H8S Series Hardware Manual page 262

Section 8 I/O Ports
• PC2/WUE10
The pin function is switched as shown below according to the PC2DDR. When the
WUEMR10 bit in WUEMR of the interrupt controller is cleared to 0, this pin can be used as
the WUE10 input pin.
PC2DDR
Pin Function
• PC1/WUE9
The pin function is switched as shown below according to the PC1DDR. When the WUEMR9
bit in WUEMR of the interrupt controller is cleared to 0, this pin can be used as the WUE9
input pin.
PC1DDR
Pin Function
• PC0/WUE8
The pin function is switched as shown below according to the PC0DDR. When the WUEMR8
bit in WUEMR of the interrupt controller is cleared to 0, this pin can be used as the WUE8
input pin.
PC0DDR
Pin Function
Rev. 3.00 Jul. 14, 2005 Page 214 of 986
REJ09B0098-0300
0
PC2 input pin
WUE10 input pin
0
PC1 input pin
WUE9 input pin
0
PC0 input pin
WUE8 input pin
1
PC2 output pin
1
PC1 output pin
1
PC0 output pin