Renesas H8S Series Hardware Manual page 707

Bit Bit Name Initial Value Slave
5 BUFINII 0
4 USERI 0
3 FLPERR 0
R/W
Host Description
1
R/(W)* R 128-Byte Buffer Initialization Interrupt/End Flag
Setting this bit by the buffer initialization command
generates a BUFINII interrupt (LMCI).
0: Buffer initialization command wait
Buffer initialization end
[Clearing condition]
When writing 0 after reading BUFINII = 1
1: Buffer initialization is in progress
[Setting condition]
When receiving by the buffer initialization
command (BUFINIIE = 1 or BUFFINIE = 1 and
HDININE = 0)
1
R/(W)* R User Command Interrupt Flag
Setting this bit by the user command generates an
USERI interrupt.
0: User command wait
User command processing end
[Clearing condition]
When writing 0 after reading USERI = 1
1: User command processing is in progress
[Setting condition]
When receiving by the user command
2
R/(W)* R Flash Memory Programming Error
0: Flash memory has been completed
programming
[Clearing condition]
Clearing by the clear status command
1: Flash memory programming error has been
occurred.
Section 18 LPC Interface (LPC)
Rev. 3.00 Jul. 14, 2005 Page 659 of 986
REJ09B0098-0300