Renesas H8S Series Hardware Manual page 863

(a) User Boot MAT Programming Selection
The boot program will transfer a programming program in response to the user boot MAT
programming selection command. The data is programmed to the user boot MAT by the
transferred programming program.
Command H'42
• Command, H'42 (1 byte): User boot MAT programming selection
Response H'06
• Response, H'06 (1 byte): Response to user boot MAT programming selection.
When the programming program has been transferred, the boot program will return ACK.
Error Response H'C2
• Error response, H'C2 (1 byte): Error response to user boot MAT programming selection
• ERROR (1 byte): Error code
H'54: Selection processing error (transfer error occurs and processing is not completed)
User MAT Programming Selection: The boot program will transfer a programming program in
response to the user MAT programming selection command. The data is programmed to the user
MAT by the transferred programming program.
Command H'43
• Command, H'43 (1 byte): User MAT programming selection
Response H'06
• Response, H'06 (1 byte): Response to user MAT programming selection.
When the programming program has been transferred, the boot program will return ACK.
Error Response H'C3
• Error response, H'C3 (1 byte): Error response to user MAT programming selection
• ERROR (1 byte): Error code
H'54: Selection processing error (transfer error occurs and processing is not completed)
(b) 128-Byte Programming
The boot program will use the programming program transferred by the programming selection
command for programming the user boot MAT or user MAT in response to the 128-byte
programming command.
ERROR
ERROR
Section 21 Flash Memory (0.18-µm F-ZTAT Version)
Rev. 3.00 Jul. 14, 2005 Page 815 of 986
REJ09B0098-0300