Renesas H8S Series Hardware Manual page 439

Bit Bit Name Initial Value R/W
3 OS3 0
2 OS2 0
1 OS1 0
0 OS0 0
Note: Only 0 can be written, for flag clearing.
*
• TCSR_X
Bit Bit Name Initial Value R/W
7 CMFB 0
6 CMFA 0
Description
R/W Output Select 3, 2
R/W These bits specify how the TMO1 pin output level is to
be changed by compare-match B of TCORB_1 and
TCNT_1.
00: No change
01: 0 is output
10: 1 is output
11: Output is inverted (toggle output)
R/W Output Select 1, 0
R/W These bits specify how the TMO1 pin output level is to
be changed by compare-match A of TCORA_1 and
TCNT_1.
00: No change
01: 0 is output
10: 1 is output
11: Output is inverted (toggle output)
Description
R/(W)* Compare-Match Flag B
[Setting condition]
When the values of TCNT_X and TCORB_X match
[Clearing condition]
Read CMFB when CMFB = 1, then write 0 in CMFB
R/(W)* Compare-Match Flag A
[Setting condition]
When the values of TCNT_X and TCORA_X match
[Clearing condition]
Read CMFA when CMFA = 1, then write 0 in CMFA
Section 13 8-Bit Timer (TMR)
Rev. 3.00 Jul. 14, 2005 Page 391 of 986
REJ09B0098-0300