Module Stop Control Registers H, L, And A (Mstpcrh, Mstpcrl, Mstpcra) - Renesas H8S Series Hardware Manual

Section 24 Power-Down Modes
24.1.3

Module Stop Control Registers H, L, and A (MSTPCRH, MSTPCRL, MSTPCRA)

MSTPCR specifies on-chip peripheral modules to shift to module stop mode in module units.
Each module can enter module stop mode by setting the corresponding bit to 1.
• MSTPCRH
Bit Bit Name Initial Value R/W
7 MSTP15 0
6 MSTP14 0
5 MSTP13 1
4 MSTP12 1
3 MSTP11 1
2 MSTP10 1
1 MSTP9 1
0 MSTP8 1
• MSTPCRL
Bit Bit Name Initial Value R/W
7 MSTP7 1
6 MSTP6 1
5 MSTP5 1
4 MSTP4 1
3 MSTP3 1
2 MSTP2 1
1 MSTP1 1
0 MSTP0 1
Rev. 3.00 Jul. 14, 2005 Page 864 of 986
REJ09B0098-0300
Corresponding Module
R/W Reserved
The initial value should not be changed.
R/W Data transfer controller (DTC)
R/W 16-bit free-running timer (FRT)
R/W 8-bit timers (TMR_0 and TMR_1)
R/W 8-bit PWM timer (PWM), 14-bit PWM timer (PWMX)
R/W Reserved
The initial value should not be changed.
R/W A/D converter
R/W 8-bit timers (TMR_X and TMR_Y)
Corresponding Module
R/W Reserved
The initial value should not be changed.
R/W Serial communication interface 1 (SCI_1)
R/W Serial communication interface 2 (SCI_2)
2
R/W I C bus interface channel 0 (IIC_0)
2
R/W I C bus interface channel 1 (IIC_1)
R/W KBU
R/W TPU
R/W LPC