Eepmov Instruction - Renesas H8S/2100 Series Hardware Manual

6-bit single-chip microcomputer

Hide thumbs Also See for H8S/2100 Series:

Table of Contents

EEPMOV Instruction

1. The EEPMOV instruction is a block transfer instruction. The data with a start address shown

in R5 and consists of bytes shown in R4L is transferred to the address shown in R6.

2. R4L and R6 must be set so that the last address of the destination (R6 +R4L) must be H'FFFF

or lower. That is, the value of R6 in the middle of execution must not be H'FFFF → H'0000.

Rev. 1.00 May 09, 2008 Page 63 of 954

Section 2 CPU

REJ09B0462-0100