Ip Dhcp-External Auto-Configure - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip dhcp-external auto-configure

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ip dhcp-external auto-configure [ agent-circuit-identifier ]
Command introduced before JunosE Release 7.1.0.
agent-circuit-identifier keyword added in JunosE Release 7.3.0.
Configures the E Series router to automatically create the user's DSI. This command is
specific to a virtual router. The no version disables the autoconfigure feature.
agent-circuit-identifier—Creates dynamic subscriber interfaces built over dynamic
VLANs that are based on the agent-circuit-id option (suboption 1) of the option 82
field in DHCP messages.
Global Configuration
Chapter 10: I Commands
757