Ip Vrrp Virtual-Address - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
ip vrrp virtual-address
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ip vrrp vrid virtual-address { auto | ipAddress ipAddress [ ipAddress ipAddress ]* }
no ip vrrp vrid virtual-address [ ipAddress ipAddress ]*
Command introduced before JunosE Release 7.1.0.
Associates an IP address with a VRID. The no version removes a list of IP addresses
associated with a VRID. The no version clears the auto flag, if auto addresses are being
used. There is no default.
vrid—VRID identifier; a number in the range 1–255
auto—Automatically learns or configures associated addresses depending on the
priority.
ipAddress—IP address
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Interface Configuration
Chapter 10: I Commands
983
Advertisement
Table of Contents
