ST STM32L4+ Series Reference Manual page 374

Peripherals interconnect matrix
10.3.15 From timers (TIM16/TIM17) to IRTIM
Purpose
General-purpose timer (TIM16/TIM17) output channel TIMx_OC1 are used to generate the
waveform of infrared signal output.
The functionality is described in
Active power mode
Run, Sleep, Low-power run, Low-power sleep.
10.3.16 From ADC (ADC1/ADC2) to DFSDM
Purpose
Up to 2 internal ADC results can be directly connected through a parallel bus to DFSDM
input in order to use DFSDM filtering capabilities.
The feature is described as part of DFSDM peripheral description in
data inputs
The possible connections are given in:
•
Section 28.7.1: DFSDM channel y configuration register (DFSDM_CHyCFGR1)
–
•
Section 28.7.5: DFSDM channel y data input register (DFSDM_CHyDATINR)
–
–
Active power mode
Run, Sleep, Low-power run, Low-power sleep.
374/2301
- Input from internal ADC
Bits 13:12 DATMPX[1:0]: Input data multiplexer for channel y
Bits 31:16 INDAT0[15:0]: Input data for channel y or channel y+1
Bits 15:0 INDAT0[15:0]: Input data for channel y
Section 43: Infrared interface
RM0432 Rev 6
RM0432
(IRTIM).
Section 28.4.6: Parallel