Download Print this page

ST STM32L4+ Series Reference Manual page 295

Hide thumbs Also See for STM32L4+ Series:

Advertisement

RM0432
Bit 17 TIM16EN: TIM16 timer clock enable
Set and cleared by software.
0: TIM16 timer clock disabled
1: TIM16 timer clock enabled
Bit 16 TIM15EN: TIM15 timer clock enable
Set and cleared by software.
0: TIM15 timer clock disabled
1: TIM15 timer clock enabled
Bit 15 Reserved, must be kept at reset value.
Bit 14 USART1EN: USART1clock enable
Set and cleared by software.
0: USART1clock disabled
1: USART1clock enabled
Bit 13 TIM8EN: TIM8 timer clock enable
Set and cleared by software.
0: TIM8 timer clock disabled
1: TIM8 timer clock enabled
Bit 12 SPI1EN: SPI1 clock enable
Set and cleared by software.
0: SPI1 clock disabled
1: SPI1 clock enabled
Bit 11 TIM1EN: TIM1 timer clock enable
Set and cleared by software.
0: TIM1 timer clock disabled
1: TIM1P timer clock enabled
Bits 10:8 Reserved, must be kept at reset value.
Bit 7 FWEN: Firewall clock enable
Set by software, reset by hardware. Software can only write 1. A write at 0 has no effect.
0: Firewall clock disabled
1: Firewall clock enabled
Bits 6:1 Reserved, must be kept at reset value.
Bit 0 SYSCFGEN: SYSCFG + COMP + VREFBUF clock enable
Set and cleared by software.
0: SYSCFG + COMP + VREFBUF clock disabled
1: SYSCFG + COMP + VREFBUF clock enabled
6.4.22
AHB1 peripheral clocks enable in Sleep and Stop modes register
(RCC_AHB1SMENR)
Address offset: 0x68
Reset value: 0x0007 1307
Access: no wait state, word, half-word and byte access
RM0432 Rev 6
Reset and clock control (RCC)
295/2301
320

Advertisement

loading
Need help?

Need help?

Do you have a question about the STM32L4+ Series and is the answer not in the manual?

Subscribe to Our Youtube Channel