Display Radius Scheme - H3C MSR 20-20 Command Reference Manual

1952 C 128: RADIUS C
HAPTER
Related command:
Example

display radius scheme

Syntax
View
Parameter
Description
Related command:
Example
C
ONFIGURATION OMMANDS
display radius scheme.
# Define RADIUS scheme radius1 to send data flows and packets destined for the
RADIUS server in kilobytes and kilo-packets.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] data-flow-format data kilo-byte packet kilo-packet
display radius scheme [ radius-scheme-name ]
Any view
radius-scheme-name: RADIUS scheme name.
Use the display radius scheme
information of a specified RADIUS scheme or all RADIUS schemes.
radius scheme.
# Display the configurations of all RADIUS schemes.
<Sysname> display radius scheme
------------------------------------------------------------------
SchemeName = systemradius1
Index=0
Primary Auth IP =127.0.0. 1.1.1.1
= active
Primary Acct IP =127.0.0.1 1.1.1.1
k = active
Second Auth IP = 0.0.0.0
Second Acct IP = 0.0.0.0
Auth Server Encryption Key= Not configured
Acct Server Encryption Key= Not configured
Accounting-On packet disable, send times = 5 , interval = 3s
Interval for timeout(second)
Retransmission times for timeout
Interval for realtime accounting(minute)
Retransmission times of realtime-accounting packet
Retransmission times of stop-accounting packet
Quiet-interval(min)
Username format
Data flow unit
Packet unit
------------------------------------------------------------------
Total 1 RADIUS scheme(s)
Table 510 Description on the fields of the display radius scheme command
Field
SchemeName
Index
Type
command to display the configuration
Type=extended
Port=1645 = 1812
Port=1646 = 1813
Port= = 1812
Port= = 1813
Description
Name of the RADIUS scheme
Index number of the RADIUS scheme
Type of the RADIUS server
State=block
State=bloc
State= = block
State= = block
=3
=3
=12
=5
=500
=5
=without-domain
=Byte
=one