1908
C
126: 802.1
HAPTER
Related command:
Example
dot1x retry
Syntax
View
Parameter
Description
Related command:
Example
dot1x supp-proxy-check
Syntax
C
C
X
ONFIGURATION
OMMANDS
After a supplicant fails the authentication, the authenticator refuses further
authentication requests from the supplicant in the period dictated by the quiet
timer.
display dot1x, dot1x timer.
# Enable the quiet timer.
<Sysname> system-view
[Sysname] dot1x quiet-period
dot1x retry max-retry-value
undo dot1x retry
System view
max-retry-value: Maximum number of attempts to send an authentication request
to a supplicant, in the range 1 to 10. The default is 2.
Use the
dot1x retry
an authentication request to a supplicant.
Use the
undo dot1x retry
By default, the authenticator can send an authentication request to a supplicant
for up to twice.
Note that after sending an authentication request to a supplicant, the
authenticator may retransmit the request if it does not receive any response at an
interval specified by the username request timeout timer or supplicant timeout
timer. The number of retransmission attempts is one less than the value set by this
command.
display dot1x.
# Set the maximum number of attempts to send an authentication request to a
supplicant as 9.
<Sysname> system-view
[Sysname] dot1x retry 9
In system view:
dot1x supp-proxy-check { logoff | trap } [ interface interface-list ]
command to set the maximum number of attempts to send
command to restore the default.