H3C MSR 20-20 Command Reference Manual page 1851

View
Parameters
Description
Related commands:
Examples
Interface view
weighting-constant exponent: Exponent used to calculate the average queue
length, in the range 1 to 16. It defaults to 9.
Use the
qos wred weighting-constant
calculate the average length of WRED queues.
Use the undo qos wred weighting-constant
Before you can configure WRED parameters on an interface, you must apply
WRED with the qos wred enable command on it.
qos wred enable, display qos wred interface.
# Set the exponent used to calculate average queue length to 6 on Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet1/0
[Sysname-Ethernet1/0] qos wfq queue-length 100 queue-number 512
[Sysname-Ethernet1/0] qos wred enable
[Sysname-Ethernet1/0] qos wred weighting-constant 6
command to set exponential used to
command to restore the default.
1851