1950
C
128: RADIUS C
HAPTER
accounting-on enable interval
Syntax
View
Parameter
Description
Related command:
Example
accounting-on enable send
Syntax
View
Parameter
C
ONFIGURATION
OMMANDS
accounting-on enable interval seconds
undo accounting-on interval
RADIUS scheme view
seconds: Time interval to retransmit accounting-on packet in seconds, ranging
from 1 to 15.
Use the
accounting-on enable interval
retransmission interval of accounting-on packets.
Use the
undo accounting-on enable interval
default.
By default, the retransmission interval of accounting-on packets is 3 seconds.
Note that:
This command is applicable to centralized devices only.
■
Execution of this command does not affect the results of other accounting-on
■
related commands such as accounting-on enable. That is, execution of the
undo accounting-on enable interval command will not disable the
accounting-on function.
The retransmission interval configured with this command takes effect
■
immediately.
radius scheme, accounting-on enable
# In RADIUS scheme rd, set the retransmission interval of accounting-on packet to
5 seconds.
<Sysname> system-view
[Sysname] radius scheme rd
[Sysname-radius-rd] accounting-on enable interval 5
accounting-on enable send send-times
undo accounting-on send
RADIUS scheme view
send-times: Maximum number of accounting-on packet retransmission attempts,
ranging from 1 to 255.
command to configure the
command to restore the