Apply Policy Outbound - H3C MSR 20-20 Command Reference Manual

1875
125
FR Q S C C
O ONFIGURATION OMMANDS

apply policy outbound

Syntax
apply policy policy-name outbound
undo apply policy outbound
View Frame relay class view
Parameters policy-name: Name of the applied policy. It is a string with 1 to 31 characters.
Description Use the command to set the FR virtual circuit queuing
apply policy outbound
to Class-Based Queuing (CBQ).
Use the undo apply policy outbound command to restore the FR virtual circuit
queuing to FIFO.
By default, FIFO queuing is adopted.
Examples # Define a classifier named class 1.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] quit
# Define a traffic behavior named behavior 1.
[Sysname] traffic behavior behavior1
[Sysname-behavior-behavior1] queue af bandwidth 56
[Sysname-behavior-behavior1] quit
# Define a policy named policy 1 and associate class 1 with behavior.
[Sysname] qos policy policy1
[Sysname-qospolicy-policy1] classifier class1 behavior behavior1
[Sysname-qospolicy-policy1] quit
# Apply a defined policy to the FR class named test 1 and set the queuing of test 1
to CBQ.
[Sysname] fr class test1
[Sysname-fr-class-test1] apply policy policy1 outbound